model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/8 applications: light strips lcd backlight decorative lighting prepared by interior automotive illuminations mobile phones product specification model no. FYLS-0603AUYUGC customer approved signatures top led type size (mm):1.6*0.8*0.3 checked by FYLS-0603AUYUGC a features: indicators rohs compliant approved by smt package lens type: water clear. http://www.foryard.com pb-free reflow soldering application emitting color:yellow/yellow green
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter [inch], tolerance is 0. 25 [.010]. 2.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/8 model no. FYLS-0603AUYUGC http://www.foryard.com FYLS-0603AUYUGC a
model. no. rev. min. tpy. y 2.00 g 2.10 y 593 g 575 y 592 g 574 y 70 g 45 --- 130 --- y g page 3/8 luminous intensity iv if = 20ma mcd 50% power angle 2? if = 20ma reverse current ir vr = 5v u a peak emission wavelength p if = 20ma 78 78 10 condition deg v nm if = 20ma unit unit 2.70 reflow soldering:250 /5sec nm 30 100 g material gold silicone algainp item reflector wire forward voltage note: 2.pay attention about static for ingan 1.luminous intensity is based on the for yard standards. encapsulate chip material gold silicone algainp // material soldering temperature vr symbol items dominant wavelength d max. 2.60 30 tsol 5 v vf if = 20ma 100 power dissipation operation temperature topr items reverse voltage if -30 o c +80 o c -40oc +100oc y absolute maximum rating a ifp peak forward current* absolute maximun ratings(ta=25 o oo o c) *pulse width Q Q Q Q 1msec duty Q Q Q Q 1/10 FYLS-0603AUYUGC model no. FYLS-0603AUYUGC forward current(dc) pd ma ma mw symbol typical electrical &optical charcteristics(ta=25oc ) tstg storage temperature http://www.foryard.com
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) page 4/8 FYLS-0603AUYUGC a model no. FYLS-0603AUYUGC http://www.foryard.com algainp/gap relative lumionous intensity(lop @max=1)
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/8 model no. FYLS-0603AUYUGC a http://www.foryard.com FYLS-0603AUYUGC
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 6/8 FYLS-0603AUYUGC a model no. FYLS-0603AUYUGC http://www.foryard.com foryard o p t o e l e c t r o n i c s led ledled led pn:fyls-xxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohs rohs rohs attention attention attention attention 0603a 4000/reel 9 reels /box 6 boxes/carton qc: qc pass reel 1 1 . 5 30 18 . 5 foryard o p t o e l e c t r o n i c s www.foryard.com 39.0 3 8 . 0 3 2 . 0 outside label outside label
model. no. rev. precautions for use: page 7/8 required if the shelf life has expired 1. storage (2)reflow soldering temperature profile and soldering time no more than 2 seconds. model no. FYLS-0603AUYUGC http://www.foryard.com before opening the packaging , check for air leaks in the bag. baking is required take the material out of the pac kaging bag before baking. do not open the oven door use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 handling of an smd led should be done only when the package has been cooled down to below 40 the epoxy resin of an smd led should not contact th e tip of the soldering iron. no mechanical stress should be exerted on the resin portion of an smd led during soldering. frequently during the baking process. 2. soldering (1) manual soldering with a soldering iron secondary protection a FYLS-0603AUYUGC to prevent moisture absorption into smd leds during the transportation and storage , the leds are pac ked smd leds must be used within 24 hours. if the leds are not within 24 hours after removal from the bag , after the bag is opened, the smd leds must be store d at <30 and < 60% rh. under these conditions, in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is peak temperature temperature pre-heat soak reflow cooling time melting-point
model. no. rev. page 8/8 the appearance and specifications of the product ma y be modified for improvement without notice. 3. static electricity esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. when washing is required, ipa (isopropyl alcohol) s hould be used. all devices, equipment and machinery must be proper ly grounded 4. others is changed slightly an operating current and therm al. this device should not be used in any type of fluid such as water, oil, organic solvent and etc reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. high-brightness led light may injure human eyes. av oid looking directly into lighted led no stress should be exerted on the package during soldering. (3) recommend soldering pad design(unit=mm) preheat time:100seconds.max must be pre-qualified to avoid damage to t he smd leds. reflow soldering should not be done more t han one time duration above 217 is 80 sec. max FYLS-0603AUYUGC http://www.foryard.com model no. FYLS-0603AUYUGC solder=sn63-pb37 average ramp-up rate:4 /sec.max peak preheat temperature:100-150 preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:230 time within 5 of actual peak temperature=10 sec. max average ramp-up rate:4 /sec.max a solder= pb-free duration above 183 is 80 sec. max time within 5 of actual peak temperature=10 sec. max peak preheat temperature:100-150 ramp-down rate:6 /sec.max peak temperature:250 smd led should not be modified after solde ring. if modification cannot be avoided, the modifi cation static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band,
|
